Cheap Concreting in 3230
If you are in 3230, the concreters you reach through this page cover Anglesea and the rest of Surf Coast - Bellarine Peninsula. Dimensions, photos and the intended load help concreters separate a path, driveway and structural slab. A quote that names the postcode, the scope and any exclusions is the one worth comparing.
Pricing spreads happen even inside one postcode. For 3230, compare at least two concreters on anything larger than a small visit, and check GST, callout and materials are in the written quote.
Concreters covering 3230
12 concreters covering Anglesea
Family-run concreting business owned and operated by Cristian Ferrantino from 9 Camdon Street, Pascoe Vale, serving Melbourne's northern suburbs. Listed from web research.
Not sure who to pick?
Record one request against eligible concreters covering Anglesea. NearMe reports the request status; it does not imply delivery.
Concreters can list their business.
Suburbs in 3230
Common questions in 3230
How much does a concrete driveway cost?+
Plain concrete driveways commonly run $65 to $90 per square metre, with exposed aggregate and decorative finishes closer to $100 to $150, so a standard driveway often lands between $4,000 and $12,000. Site access, excavation and reinforcement drive the price. Get the thickness and steel specified in the quote.
How thick should a concrete driveway be?+
A residential driveway is typically 100mm thick with reinforcement, and thicker where heavier vehicles are involved. Thickness, a compacted base and steel reinforcement are what stop a driveway cracking under load. Be wary of a cheap quote that skimps on base preparation or steel.
How long before I can use new concrete?+
You can usually walk on new concrete after 24 to 48 hours, but wait about seven days before driving on a new driveway and around 28 days for it to reach full strength. Rushing vehicle traffic onto fresh concrete is a common cause of early cracking.
Do I need council approval for concreting?+
Paths and driveways on private land often do not need approval, but slabs for structures, work in easements, and changes to stormwater or crossovers can require council or water-authority approval. Ask your concreter to confirm before pouring, since removing non-compliant work is expensive.
Why does concrete crack?+
Some fine hairline cracking is normal as concrete cures, but larger cracks usually come from a poor base, missing or badly placed reinforcement, no control joints, or loading it too early. A properly prepared and jointed slab minimises cracking. Control joints are placed to make any cracking follow a straight, hidden line.