Cheap Concreting in 5013
Postcode 5013 sits in Port Adelaide - West, South Australia, and covers 6 suburbs including Gillman, Ottoway, Pennington and Rosewater. This page compares local concreters who work that area, so quotes are tied to where the job actually is rather than a generic national lead. Ask each concreter for excavation, base preparation, reinforcement, finish, drainage and curing time.
Ask whether engineering, approvals or crossover rules apply before concrete is poured. Keep that beside the price. In Port Adelaide - West, South Australia, a clear quote should read as if the concreter knows where the job is and what it involves.
Ken Hall Plumbers
SponsoredDomestic and commercial plumbing, gas fitting and roofing across metropolitan Adelaide with 24 hour service.
Acacia Pool Service
NearbySA owned family pool business established 1987, servicing greater Adelaide.
Concreters covering 5013
5 concreters covering Gillman
- A1 Adelaide ConcreteVerified
Driveways, footpaths and exposed aggregate, servicing Adelaide for over 40 years.
- N & F Concrete SpecialistsVerified
Family-owned with over 50 years experience: driveways, footpaths, steps and exposed aggregate.
- Concrete Driveways AdelaideVerified
Driveway concreting specialists across finishes.
- Adelaide Concrete CoVerified
Concrete driveways, footpaths, exposed aggregate and more.
- Pro Concrete AdelaideVerified
Residential and commercial concrete driveways and exposed aggregate.
Not sure who to pick?
Get the details for every concreter covering Gillman in one text and compare them yourself.
Concreters can list their business.
Suburbs in 5013
Common questions in 5013
How much does a concrete driveway cost?+
Plain concrete driveways commonly run $65 to $90 per square metre, with exposed aggregate and decorative finishes closer to $100 to $150, so a standard driveway often lands between $4,000 and $12,000. Site access, excavation and reinforcement drive the price. Get the thickness and steel specified in the quote.
How thick should a concrete driveway be?+
A residential driveway is typically 100mm thick with reinforcement, and thicker where heavier vehicles are involved. Thickness, a compacted base and steel reinforcement are what stop a driveway cracking under load. Be wary of a cheap quote that skimps on base preparation or steel.
How long before I can use new concrete?+
You can usually walk on new concrete after 24 to 48 hours, but wait about seven days before driving on a new driveway and around 28 days for it to reach full strength. Rushing vehicle traffic onto fresh concrete is a common cause of early cracking.
Do I need council approval for concreting?+
Paths and driveways on private land often do not need approval, but slabs for structures, work in easements, and changes to stormwater or crossovers can require council or water-authority approval. Ask your concreter to confirm before pouring, since removing non-compliant work is expensive.
Why does concrete crack?+
Some fine hairline cracking is normal as concrete cures, but larger cracks usually come from a poor base, missing or badly placed reinforcement, no control joints, or loading it too early. A properly prepared and jointed slab minimises cracking. Control joints are placed to make any cracking follow a straight, hidden line.